This CLEAN-DIRTY sign has two 8mm x 3mm magnets embedded inside the sign (no glue required).
CLEAN is on one side and DIRTY on the other side. Just flip over as required.
Make CLEAN one color and DIRTY another color for easy identification.
Assuming a layer height of 0.2mm (this is what the gcode does):
Start with the CLEAN color of your choice.
At layer 1.2mm change to center color (black)
At layer 5.2mm insert two 8x3mm magnets
At layer 6.2 change to the DIRTY color
Enjoy!
Layer height: 0.2mm
Perimeters: 2
Infill: 15%
Supports : None
Print time: 33 min
Size: 69 x 24 x 7 mm
The author marked this model as their own original creation.