brio mini: track set

I create a smaller version of the brio track set.
The track is only 25mm wide and the curver track is 60 degree, so dont need other straight track.

The base.scad contains all base modules. Need for future extensions.

NOT COMPATIBLE BY STANDARD BRIO/IKEA/TESCO TRACK!

Print instructions

Category: Toys & Games Print Settings

Printer Brand: RepRap

Printer: Prusa i3

Rafts: Doesn't Matter

Supports: No

Resolution: 0.15 mm, 0.3 mm

Infill: 10%, 20%

Notes:

This is the first big project, so I played the setting (layer height, infill, permiters) and the materials (the orange is ABS with ABS Juice, other is PLA printed on glue stick)