They are designed to be printed in pairs and are held with one screw each. The pairs line up via a connector, which is later hidden by the skis. They hold my powder skis, which weigh 15kg, no problem. You could also only print the lower half if you don't need two racks.
Printing notes:
Designed with Fusion 360. The .f3d file is included, if you want to modify the model.
If you have any questions please leave a comment.
Please fell free to share your make!
Edit 20.12.2020 :
One of the bindings of my other skis was hitting the wall so i added a "Distance block". It is made to be fixed in place with a small pin (in my case a nail). There is a 1cm, 2 cm and a 3cm version.
Edit 24.12.2020 :
I've added a model without the connector.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
30% Gyroid - see printing notes
Filament: Azurefilm PLA PLA White
Notes:
I gave mine a nice paint-job.
The author marked this model as their own original creation. Imported from Thingiverse.