Behringer Neutron Eurorack Breakout Box

The Behringer Neutron semi-modular synth can be mounted as a Eurorack module, but you lose the breakout panel that includes MIDI thru, USB, and power connector. I didn't want to lose those connections so I gutted the electronics and mounted them in this faceplate/enclosure.

THe face panel was laser printed on neon UV paper, laminated, holes cutout, and super glued onto the 3d-printed faceplate.

I like my Neutron is still using its wall wart instead of drawing on my Eurorack power because the Neutron manual says it needs 1amp at 12v, and that would be a large chunk of my Eurorack amperage. I mounted a power strip inside my Eurorack box for things like the Neutron wall wart, and the power that supplies my Eurorack power module.

Print Settings

Printer Brand:

Monoprice

Printer:

Maker Ultimate

Rafts:

No

Supports:

No

Resolution:

0.16

Infill:

15%

Filament: any I use PLA+ for Eurorack faceplates