These wheels are for the popular 2 x 72 inch belt sander that are popular builds especially among knife makers. I made a tracking wheel to replace the one I had with a larger crown to see if it would make tracking the belt easier and found it didn't work any better. The wheel did hold up well and would be suitable if wanting to build a sander. These are normal crown on the tracking wheel which is just under 3 inches and a 2 inch idler wheel.
They are designed for a 1616 - 2sr bearing 1/2 x 1.125 x .375 inch.
I printed with 5 layers all around and 25 percent fill in ABS.
Cheers
Kisssys
Category: Machine ToolsThe author marked this model as their own original creation. Imported from Thingiverse.