External Lack Power/USB extension for Prusa Mini

To assemble I used:

• 1 - m3x8mm set screw
• 2 - #8 x 1/2" Truss head wood screws
• 0.8 meters of 16awg wire (2 conductors)
• 0.7 meters of this wire wrap:
• https://www.amazon.com/gp/product/B07HXSL2SH
• 2 - small zip ties
• 1 - 19x23mm grommet
• This USB cable
• https://www.amazon.com/gp/product/B017XUSKVK 
• 1 of these switches
• https://www.amazon.com/gp/product/B01N2U8PK0 
• 4 spade connectors (14-16 gauge female) 
• 1/8" heat shrink to insulate the spade connectors
• A few ounces of bravery when cutting the acrylic for the cable hole piece
• CA Glue to glue the cable hole in place

Step files included, in case your grommet, switch, or USB cable will not fit my dimensions

Apologies of the mixing of SAE and metric units.  Those were the units of the materials I had at hand