This is an enclosure for a DHT11 sensor module.
The Sensor/PCB is held inside the case body by the post, and the lid is secured to the body
using a flat or pan head M2x3 screw through the same post.
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
.02
Infill:
5%
Notes:
Support for lid may be needed on the screw placement. Other than that, no supports should be required.
Category: 3D PrintingThe author marked this model as their own original creation. Imported from Thingiverse.