Frankenstein neck bolts

Made these last minute for a work college how mentioned he was going to a fancy dress party as Frankenstein. I joked about him having neck bolts but said he didn’t have any. So I quickly drew these up and printed them out.

The magnets clamp the 'bolts' in place through clothing, in this case he was going to be wearing a polar neck jumper.

Check out the pictures and you’ll see that they are held in place with magnets.

The magnets used are O/D 12.5mm x 3mm thick. The hole dia is I/D 5.4mm but this is not required for this project.

Bit late for this year (2019 lol) but ready for neck's years......(neck...get it lol)

Print Settings

Printer Brand:

Ultimaker

Printer:

S5

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

10%

Filament: Ultimaker PLA n/a

Notes:

These were printed at 10% infill due to limited time.
Support was not needed, due to limited time.

The 'threads' didn't print to bad considering and accuracy was not a concern.