Geniale Arbeit, danke dafür.
Caffeine Wall Art
Makes
Comments
Very nice! Printed with eSun PETG-HS with Amazon and CC3D Silk PLAs.
I finally found the time to print this masterpiece.
Some weeks ago we both talked about the H3C in the upper left corner :-)
Not even a day later you uploaded the ''new'' version.
I really have to say Thank you again for the effort you put into this model.
I really couldn't decide which version to print.
So I printed a down-scaled version @ 65% on X and Y axis on my Ender 2 Pro with the H3C and a bigger version on my Ender 3 with the CH3 :-)
Sadly I ran out of white Filament so the bigger verision isn't complete at the moment.
Like J.K. 3D@JK3D_996667 I only had to glue both frame parts. All the other parts don't require glue or something like that. Just a perfect press-fit. Everything stays in place flawless.
So thank you very much again for sharing this beautiful piece of art with us.
Keeps making me smile every day :-)
Justified 5 Star-Rating !!!
Printed in Sunlu PLA+ Black / White
0.2mm Layer Hight
2 Perimeters and 10% Grid-Infill (edited)
A.M.A.Z.I.N.G !!! Perfect fit for all parts.
I used 2 drops of epoxy resin to fix both of the frame parts. Thats all !!! Even the tiny lettering fits so perfect. I Love it.
Thank you very much for sharing this beauty !!!
Looks so good! I really want to print it! Let's talk about the CH3 in the upper left corner..... Once there was a wise man who told me....... It's not right, its not wrong, it's the best and most esthetic way to choose. You are so right !!! ;-) (edited)
Nice model but a bit overly complicated as presented.
I printed this in black PLA with a color change on the top layers to gold silk PLA. I used Hilbert Curve for the top layer infill pattern. I didn't print any of the embossing letters.
While I used a Bambu with AMS, this same effect is easy enough with a single filament swap during the print.
I used VHB tape on the back of the circles only to hold this to the wall.
I tossed some of the initial circles around to use as coasters.
3D Print over 2 days with PLA galaxy grey, ASA galaxy black and standard Prusa i3 MKS+ settings. Was fun to print. Filling could be reduced from 15% to 10% (edited)
