Modular Router Plate for Bosch GKF-12V

Modular router plate for the Bosch GKF-12V.
82
348
4
3196
updated February 28, 2022

Description

PDF

Modular router plate for the Bosch GKF-12V.

Highly inspired and based on thing 3707881 by EpicFazer.

I wanted a plate that I could use for different purposes, without having to disassemble the entire thing every time. It also has the added bonus on being almost as original when no attachment is on.

Currently has:

  • Bosch FSN rail attachment
  • Adjustable slide attachment, from center to ~11cm

The parts needed, in addition to the 3D printed parts is:

  • 2x M3 threaded insert (Bondtech, but any should do)
  • 2x M3x8mm hex socket bolt (DIN 912, a lot others would probably fit)
  • 1x M4 threaded insert (same as above)
  • 1x M4x30mm (could be a lot shorter, but that's something I had)

Print Settings

Printer:

Prusa Mini

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

15%

Filament:

Fiberlogy PETG

Graphite/White


Notes:

In general chose the orientation that would produce the least amount of supports, in the least problematic areas.

"Supports on build plate only" in PrusaSlicer. Printed with 3 perimeters, to increase strength a bit.

Category: DIY

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License