Forza Horizon 5 Intro Parachute (Hotwheels Ford Bronco)

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068

Custom display base are also available from $5! Contact me to discuss what you want!

If you like my work, you can support me Printables Clubs! Just click the “Support & Join”  button beside my name or here: https://www.printables.com/@GigaPenguin#join:279  

Exclusive models are included too!

You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts

Description

The parachute rack is based on the original artwork by Senior Concept Artist at Playground Games, Nick Foremanat ArtStation: https://www.artstation.com/artwork/OmqJy6

The rack has been further simplified to fit Hotwheels proportions and also to make it easier to print with a FDM printer. So it looks quite different from the original design. Also, my Hotwheels Bronco has been slightly modified with much bigger wheels, i'm not too sure how it looks with standard wheels. If it doesn't look right please let me know.

Parts required

There are only 2 files to print:

• Parachute rack (V9.STL)
• Parachute (Parachute1.STL)

To secure the car from falling off, I have included a thin game for wires to pass through under the wheels and rack, as seen in picture 6 above.

The connection from the rack to the parachute is connected with simple strings. Both the rack and parachute has a 2.5mm holes, so any strings or wire thinner than that should go through just fine.

Rack Print Settings (V9.STL)

Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm (minimum, smaller better)

Parachute Print Settings (Parachute1.STL)

Nozzle size =1.0 mm (smaller better but I use 1.0mm to save time)

Others

Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.

I can be contacted through Instagram or Twitter too:

Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/