Printed in white ABS on Bambu X1C. Absolute Genius! First perfect.
HDD Hard Disk Drive Stacker
A simple and scalable hard drive mount for external applications. Print 2 per drive and stack them up. If you stack 4…
289
1233
8
7685
updated February 28, 2022
Makes
Comments
Had to flex the rig a bit I don’t have enough space for it in the case so for now it’s hanging around out back of the case
@thatguymakes_849101 Glad it helped you!
@Aaron great to hear, thanks for the make!
Printed great without supports. Nice snug fit around the drives. Needed a cheap solution better than tape (or just stacking the drives). Thanks for the design!
Perfect exactly what I needed for my pile of hard drives. Printed .2 layer height, 15% infill. I have 7 drives stacked up on top of each other and it feels totally stable.
Taped two fans to the side until I can get around to finding proper screws for them.
Great, simple solution for a DIY NAS. The parts fit together well and weren't too tight. I turned mine on the side with fans on top and bottom to push/pull air through the stack. Works great!
I'm tryin this out. i needed something to hold many drives together on some shelves i have. I'll post a picture if it works out :D
Excellent simple design, does what it says on the tin, fit just right for me on first try with PLA, 0.4mm layer height. Needed a bit of force to get them in together, but means they are nice and snug with little chance of coming loose. of Uses much less material than some other designs for HDD holders.