This was initially going to be a remix, but the mesh I was trying to work from was just too problematic so I only ended up using it for proportions and remade everything from reference photos.
It's a bit problematic to print so I've split it into 4 pieces of which the main spire requires minor supports.
NOTE: Some parts of the mesh cannot be printed with a 0.4mm nozzle, use around 0.08mm horizontal expansion for the "hull" parts at default scale.
The ring will likely be a very tight fit initially, I suggest gradually sanding and comparing the attachment arms until it can be glued to the central spire.
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
15
The author marked this model as their own original creation. Imported from Thingiverse.