Number One Willy

Because I only make the mostfunctional prints, I decided to combine two very ridiculous prints and make them available to the public because, you know, I can imagine so many other people getting use out of this thing.

I've only printed it pint-sized so far and it looks hilarious, I assume it will scale up with no issues. Not sure how small it'll go, but I presume that's up to your printer and your judgement.

Since my original upload, I've uploaded a more "proportional" one, where the topper is almost "part" of the trophy, as well as a "middle-of-the-road" one where there's a bit space away from each edge of the platform. Check them all out and print the one you like best, or collect them all, if that's your thing!

Of note, all versions available for download are now fixed for Slic3r. Thanks to the creator of the original "Replica Pecker", Prizmagnetic for the heads up and guidance to a way to fix the issue.

The only difference between the three files are the proportions of the "topper" to the base. "Proportional" makes the top more of an extension to the base - with a tiny bit of the bottom hanging off of the edge of the trophy base. Medium, which my wife thinks is the funniest, looks slightly more like a trophy. I'm starting to like that one myself. "Original" is a fixed version of the print with the original proportions. The topper is a smaller than the others, with a lot of wiggle room and empty space atop the base.

Print Settings

Printer Brand:

Monoprice

Printer:

Maker Select Plus

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

.2 (Or whatever, really.)

Infill:

Doesn't matter much.

How I Designed This

It was a painstaking process, taking over 1000 man hours. I lost my family designing this print.

Ok, not really. Took a few minutes in Tinkercad because two others have graciously made their work available on Thingiverse. Just plopped them together.