Pokeball Coin Bank

I designed this piggybank for my little brother. The Fusion 360 file is also available to download so you can easily make remixes.

Enjoy!

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2.5

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

5%

Notes:

Supports are only necessary for the stand.

You can print the inner shell halves at 0.35mm like I did, since most of it will be covered by the outer shell halves, which you will have to glue to the inner shell halves.

Both inner shell and outer shell halves should be printed with the dome side up.

You should print the pegs lying down for better strength. No supports should be necessary but you may want to add a brim for better adhesion.