Ikea Bladlös magnet

Designed this magnet because i used some at work and playing with them was really entertaining.

Printing:

Print until you reach the upper part of the magnet slot, insert three 6 by 2 mm disc magnets and keep printing.

You will need 12 6 by 2 mm disc magnets for a pair of magnets

Print Settings

Printer:

Sidewinder X1

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.2 mm

Infill:

20%

Filament:

Orange

Notes:

The filament type really does not matter. Also use 3 to 4 perimeters for a nice hefty feeling.