Slider Fidget Toy

Very small and addictive slider fidget. Slider 'snaps' back and forth into each end, allowing hours of mindless motion.

The sides of the base are contoured for a comfortable hold with your fingers. Magnets are used to give a nice snap into each position. 8x3mm magnets are recommended, but smaller magnets should also work. The larger the magnets, the better the ‘snap’ into positions. 

The slider has a magnet glued into the bottom. The base has 2 options - one with magnets glued in place and another with embedded magnets. Approximately 30 minute total print time!