2020 T-Slot-cover Voron branded

Most Voron printers are based on 2020 6mm T-slot extrusions (aka Misumi extrusions). These covers close horizontal slots so dirt or screws won't get caught.

I print this with 2 perimeters and 23% infill, 0.2mm lineheight. It's a fast print and won't take much time or plastic. Cut to size for your requirements.

I designed these for a snug fit. If you have problems fitting them in, just give the back edges a wipe with sandpaper. 

This print looks better in bi-color which is easy to achieve: If printing at 0.2mm lineheight, add a pause at layer 4 and swap the filament, then continue.