One Piece Raspberry Pi Zero 2 W + Pi Camera case and stand/ articulating wall mount

This is a remix of Superrei's Raspberry Pi Zero + Camera Case. I'm using it with my Raspberry Pi Zero 2 W and a Pi Cam. Note that the case is still print-in-place. It does not snap together but rather works like a book cover.

I have added some venting holes as well as pockets for M2 nuts to safely attach the Pi to the case with M2x8 screws.

My Pi works with Mainsail, a webinterface for the Klipper firmware, but Octoprint should work as well. Thus, I needed a simple way to direct its camera to my printer.

That's why I used the parts of Kanata's Logitech C270 Articulating Arm

https://www.thingiverse.com/thing:2153209

(which I already printed years ago) and modeled a compatible attachment piece. You can simply put the case into that part, which should hold it safely in place.

I have also included the attachment piece as a simple stand to use without the articulating arm.

Print Settings

Printer:

Anycubic i3 Mega

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%

Filament:

Black

Notes:

The tolerances of the attachment piece/ stand and the case are really small to guarantee a tight fit. You might want to scale them up by a little if your printer is not calibrated well.