Parameterized Power Strip Mount

Fully parameterized mount for power strips and other rectangular things. Use OpenScad for adjusting.
1h 16m
1× print file
0.20 mm
0.40 mm
9.00 g
Creality Ender 3
149
864
20
2828
updated February 25, 2022

Description

PDF

This is a fully parameterized mount for power strips, but it will fit any other rectangular thing you want to mount on a flat surface (like my Dell PSU).

I found some designs here, but none fitted the strips I had at home.

The .3mf file provided is just an example, and will fit a power strip with the following dimensions (that's the one you see in the pictures):

Width: 53mm
Height: 41mm

To customize, you will need OpenScad and the dimensions of your power strip (just measure them but account for a little clearance, .5mm worked for me). Then get the .scad file, open it and fill in your dimensions at the top. Make sure the mount is not to wide, so it will not cover any power sockets and make sure the power cord will fit through the hole (there are parameters for those dimensions, too). All dimensions are in millimeters.

Print Settings

Perimeters:

5 

Infill: 

50%

Filament: 

PETG

Notes:

I also used PETG, but I don't see, why PLA or anything else wouldn't work.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License