Samsung Galaxy Z Fold 3 Case with Built in Stand and S Pen Holder slot

EDIT: Uploaded wrong stand file. Correct one is uploaded now

Modified catly1's modification to fit in the S Pen holder from the official Samsung case.

Added a notch on the back that should fit the S Pen holder without getting stuck. The notch goes a little too deep, but some electrical tape fixes that, and then the pen friction fits in with a proper notch for the bump on the holder. Depending on how your printer handles bridges, it may or may not be necessary.

The front cover was also adjusted to account for gesture navigation use but cutting away the bottom edge. Top edge was also cut away to account for the earpiece.

The back should not need any supports, the front most likely will.

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

No

Supports:

Yes

Infill:

20

Filament:

Marble