ChipSHOUTER CNC Bracket

A simple bracket that mounts in place of a spindle on 3018 style CNC machines, no modification to the CNC is required.
4h 39m
1× print file
0.15 mm
0.40 mm
57.00 g
0
48
0
642
updated February 24, 2022

Description

PDF

This is made for a CNC 3018 with ~42.5mm diameter spindle. If you have a different diameter please let me know I will happily adjust the model and add it.

Allows for a very flexible Z-axis rough adjustment:

  • You can insert the bracket into the spindle mount from the top or the bottom
  • There is about 25mm of play vertically for even more adjustment
  • You can tighten it on many different spots on ChipSHOUTER itself for even more Z-axis flexibility

Hardware needed:

  • 2x M3 x 16 screws
  • 2x M3 nuts

The clamp is just a little bit (~0.5mm) too short front-to-back so the two screws hold the body firmly in the clamp without leaving marks on the ChipSHOUTER.

Printed with no supports, 20% infill. Personally made this with PLA, plenty strong for the use.

Tags



Model origin

The author hasn't provided the model origin yet.

License


Highlighted models from creator

View more