Raspberry Pi Cam V2.1 mount

Mount for Raspberry Pi Camer V2.1 for the front left corner on a RatRig V-Core 3.

Place the camera module into Pi_Cam_Back and push Pi_Cam_Front into place. I didn't need to use glue.

Insert he clips for the camera cable into the 3030 extrusion and turn 90 degree. They have a very tight fit!

Prints without supports.

Printed in PETG at layer height 0.2mm.

Hardware needed:

• M3 bolts for the camera mount, 2x M3x6 mm
• M3 heat inserts for Pi_Cam_Back, 2x
• M4 bolt, washer and locking nut for mounting the camera to the corner bracket, 1x M4x8 mm
• M6 bolts and nuts for the 3030 extrusion for mounting the corner bracket, 2x M6x12 mm