Raspberry Pi 4B DIN rail mount with optional fan

DIN rail mount for the Raspberry Pi 4B with an optional mount fo a 60mm fan.

Prints without supports.

Printed in PETG at layer height 0.2mm.

I mountend the Raspberry with M3 brass standoffs.  The Raspberry is designed for M2.5 screws! I used a 3mm drill bit to make the holes larger!

Fan Mount is designed for M3 heat inserts.

The fan mount has clips to hold the fan in place. I didn't use screws for the fan. The fan mount is designed for a 60mm fan (60x60x13.5). There is a version with a cable guide for the Raspberry Pi Camera and one without it.

Update 27.10.2023: fan mount for 60x60x25 mm fan added.

DIN Rail Mount is based on the Voron DIN rail clip. (https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/pcb_din_clip_x3.stl)

Hardware needed:

• M3 bolts for the Raspberry, 8x M3x6 mm
• PCB standoffs brass, 4x M3x10 mm
• M3 heat inserts for mounting the fan, 2x
• M3 bolts for mounting the fan, 2x M3x6 mm

Used the DIN Rail clip for my Mount