Terraforming Mars components

Components for the game "Terraforming Mars" by Stronghold games; -"Player Cards" which sit atop (or in place of) the…
147
1125
9
8345
updated February 20, 2024

Description

PDF

Tip/Donate

 

Components for the game "Terraforming Mars" by Stronghold games;

-"Player Cards" which sit atop (or in place of) the player card you use and play on for the game

-"Cube Trays" that help hold together the different unit cubes (gold, silver, bronze)

-"Hex" and "Card holders" that will house your cards and hex tiles for storage as well as play

Plus some other misc pieces. The card holders should all be sized for sleeves, I personally have mine sleeved with 64.5x90mm sleeves and they fit perfectly snug.

Hellas & Elysium, Venus Next, and Prelude compatible!!

The "TM - Hex and Cardsv4.0" (comes in two parts) will hold all cards for the game with room to spare! They sit atop the Venus Next and Hellas & Elysium boards in your box. Unfortunately I am having trouble figuring out how to fit the "... Player card 2.x" versions of the player card into the box with the new card holders. Currently only the "... Player card 1.x" seem to fit nicely in between.

Print Settings

Rafts:

Doesn't Matter

Supports:

No

Resolution:

.2 or .3 - Don't bother with anything below .2

Infill:

20% or higher.

What to Print

What exactly do I need to print to fit my box and game?

5 "Player cards"

I would recommend (though feel free to pick and choose) printing 5 copies of the "TM - Player Card Split 1.3" you'll notice they are in two pieces to help fit on some smaller beds.

Please note, depending on what player cards you choose you may not be able to fit everything in the box. Heed my recommendation for the TM - Player Card Split 1.3 version and see the pictures I posted in the album of my box.

1 Card and Hex Tile holder

The newest one I posted should have plenty of room for sleeved and "naked" cards (including fitting in all Venus Next and Prelude cards). If you do make my newest one I strongly recommend welding the pieces together with acetone, and for that matter paint a little acetone over the whole piece, it should make it a bit stronger and tougher.

1 or 2 Cube Trays

My favorite one which seems to work the best so far is the "Terraforming Mars - Cube Tray split - Small - scalloped"

ChangeLog

--10-7-16--

Hex/Card holder - Enlarged hex holders so that hexes fit.

--10-13-16--

Added Player Card Holder/guide. Should be able to fit the cubes better than loosely setting them on the board.

Also added another Hex/Card holder .stl that has larger card boxes to try to house sleeved cards, dimensions of newer larger size cardbox shown in picture.

--10-16-16--

Added Player Card Holder in two pieces if your printer was like mine and didn't want to print it all in one piece. Works and fits fine

--11-19-16--

Added singular production counter pieces.

--11-30-16--

Added new player board that requires less plastic, is smaller, and lets you see the numbers from the board still! Player Card 2.0!

You may consider printing this at 101% or 102% just to make sure the cubes fit nicely and don't slide around.

--12-4-16--

Modified new player card 2.0 so that the little triangle pieces that hold the cube in place are much shorter, it should still hold the cube fine but it will be much less prone to break.

You may consider printing this at 101% or 102% just to make sure the cubes fit nicely and don't slide around.

--1-29-17--

Added the smaller piece of the "cube tray split" in a shallower version that should be easier to grab cubes from.

--3-28-17--

Added half of a card holder/hex piece. Able to hold 1 stack of cards and 2 columns of hexes.

--4-2-17--

Added player card 2.2, a little bit smaller on the separator pieces that come off the model, should be easier to fit in the box.

--4-2-17--

Removed older hex and cards .stls and replaced with same-ish file but the hex columns have been centered on the card holder, it's a minor thing but some people had mentioned it to me.

--4-2-17--

Added a "Pro" player board that doesn't use a bunch of fiddly unit cubes. You can keep track of production and number of units with number grids. Comes in two parts. Currently the space symbol on board part 1 has too small of "sun beams" so the detail likely won't come out in your slicer. I will fix that later.

--4-27-17--

Thank you Mike1840858 for the idea (that I'm totally stealing). I increased the height of the card holders to accommodate sleeved cards. There is a new "Hex and Sleeved" cards .stl.

--5-14-17--

Added updated version of the card/tray holder with diamonds cut into the sides to reduce the amount of plastic needed and to give it a little more flair.

Also added a file for a single card tray (with the diamonds), and a file just for the hex tile holders.

Both of these card tray pieces are big enough for sleeved cards.

--5-17-17--

Added file for cube tray that is shorter and has scalloped edges to help make it easier to grab cubes out of it

--5-20-17--

Added another hex and card file that has a little bit better tolerances for sleeved cards. Updated the separate card holder likewise.

--6-17-17--

Added "Card tray separate double tall" which is just two single card trays stacked on top of each other, again, capable of holding sleeved cards

Also increased size of all card trays with the "diamond" walls by 3% to help with tolerances.

--6-26-17--

Removed older Hex and Cardsv2 split file as it was just for unsleeved cards. Added new file that has the diamond walls. ("...v3").

--11-27-17--

Added a thinner smaller version of the first player card (Terraforming Mars - Player Card 1.1.stl). Should fit in a 150x230 printer bed now with no issues, also added a notch opening for the energy to transfer to heat. Enjoy!

--01-29-18--

Added new version of player card 2 (version 2.3) that has a "10" spot for each resource and has an arrow to remind you that energy goes to heat.

--02-24-18--

Added new version of Hex and Card holder to accommodate Venus Next and upcoming prelude cards while still fitting in box "TM - Hex and Cardsv4.0" comes in two parts. Also split "Player card 1.2" into two parts, this part in particular fits nicely squeezed in between the new Hex and Card holder and the existing cube holders I have. You'll find pictures of how my box is laid out in my album for this page.

--08-31-18--

It was brought to my attention that hex and card holder 4.0 piece 2 didn't slice correctly in cura. Fixed it and it should now slice fine (at least it did for my cura). This is odd since it sliced for me perfectly the first time I printed, whatever, it should be good now.

--09-01-18--

Added "TM - Player Card Split 1.3 - Piece 1" and "... Piece 2", this is just a minor change that adds a 10, 20, and 30, spot for MC production.

--09-09-18--

Someone pointed out that the Hex and Card v4.0 pieces were not quite properly aligned. I re-exported them and checked them in Cura and they are now correct sizing, sorry for anyone who ran into issues with that!!

Category: Games

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License


Highlighted models from creator

View more