Corner shelf supports, very low profile

I made this for a 30-35 cm long, 18mm corner shelf. PETG @60% infill tested, can hold at least 6 Kg. Print vertically.
7
19
0
415
updated February 21, 2022

Description

PDF

Print so that the smallest surface is horizontal (so that they are “standing up"). Slotted for leveling convenience. Included a hole for an M2.5 screw, which when tightened prevents the shelf from sliding out of the supports.

It should be possible to only use two of the four supports for smaller shelves.

Tags



Model origin

The author hasn't provided the model origin yet.

License