Housing Raspberry Pi4
Housing that mounts directly onto the Prusa mk3.
You just need 4 screews with washers M2x20 and 2 screws M3x8.
11
93
0
1295
updated February 20, 2022
Description
PDFPrintable with any material, without supports.
I printed it with Jetblack Prusa PETG.
Installation:
-Screew the Body to the frame of the printer (2 holes in the vertical line on the left side)
-insert the RaspberryPi
-Screw on the Lid (4 M2 Screws)
Its better to screw the screws in and out again, before you actualy screw the parts together.
Tags
Model origin
The author hasn't provided the model origin yet.
