CorEssentials CoreXY 3D printer

CorEssentials is an open source corexy 3D printer.

• Built Volume: 240 mm x 250 x mm x 250 mm
• Hotend: E3D V6 0.4mm (Bowden & direct available)
• Extruder: Bondtech BMG
• Built Plate: Magnetic Spring Steel with PEI or Pertinax
• Heated Bed: 230V, 600W silicone heater up to 120°C
• Connectivity: 7" Touchscreen, USB and Ethernet
• Bed Leveling: Hardware bed leveling with 4 independent motors
• Filament runout sensor
• Enclosure: Completely enclosed print volume with active temperature regulation and passive heated chamber (through heated bed), LED illumination
• Open for all Filament
• Filament Diameter: 1.75mm
• Supported Filament: ABS, ASA, PC, Nylon, PETG, PLA, PP, HIPS and much more // carbon and particle filled filaments possible with different toolhead
• Controller: Duet 2 Maestro with a total of 7 stepper drivers
• Heated bed: KEENOVO 230V 600W heater
• Power Supply: Meanwell 24V 10A
• Coldend cooling: 2510 axial fan
• Part cooling: 2x 3510 blower fan
• Chamber filtration: 6025 axial fan
• Electronics cooling: 2x 6025 axial fan
• Linear Motion: CE MGN9H for xy gantry and 10mm rods for z
• Belt driven z axis
• Completely open source: all Fusion 360 files and .stp assembly available

Find the Fusion360 model for your viewing pleasure here:

https://a360.co/2q4ACzH

For the most current file visit the GITHUB:

https://github.com/MacNite/CorEssentials