CR-10 V2 Omron TL-Q5MC2 inductive probe mount

Quick and dirty mount to fit a Omron TL-Q5MC2 probe (or similar square clone like Vorons use) onto the BL-Touch mount point on a CR10-V2.

Requires you to have a spring steel flex plate to work well but more reliable than the BL-Touch.

Works well while I wait for my Voron parts :-)

If you going to be printing hot or enclosed then print it in ABS to stop the droop above 50C :-)

Print Settings

Printer:

CR-10

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

40

Filament:

Any