These files are for Personal Use Only. If you would like a Commercial License to sell prints made from these designs, please join me on Patreon: https://www.patreon.com/kazitoad
It features an internal drip tray, a removable mesh divider, a pour spout for excess water, a flat back and two mounting holes for hanging.
It measures ~13 x 6.5 x 8 cm.
Feel free to use a common 10cm plant pot mesh (pictured above) cut in half instead of the "mesh divider" STL.
Print without support and use a brim if needed (or tabs).
Feel free to print with a large nozzle and layer width, thick layer lines look great on this print.
The author marked this model as their own original creation.