Sunlu S1 - Filament guide+Temp/Humidity Holder

Holder for Sunlu S1 Filament Dryer
39
219
3
1540
updated February 19, 2022

Description

PDF

Temperature and humidity display holder with integrated filament guide/bowden coupler 

it uses the screws that is holding the heating element, so be sure to use PETG/ABS or some other high temp stuff

no drilling is required

 

This is an remix of 2AndreasR81's Hygrometer Sunlu S1 Filament Dryer 

and from Thingiverse EveningNewbs's Angled PTFE Tube Guide for Sunlu FilaDryer S1

Credit to both of you ! 

 

---------------------------------------------------

Print the items as imported no need to adjust the orientation

My settings:
PETG

Layer height: 0.2
Perimeters: 3
Infill: 20% Rectilinear infill

Absolutely need supports!

 

I found that to make it strong as possible it must be printed in the orientations like in the picture, also turn down the speed, maybe lower the fan alittle for PETG, and use support everywhere 

 

Tags



Model origin

The author hasn't provided the model origin yet.

License


Highlighted models from creator

View more