Mario Warp Pipe Planter

This warp pipe planter prints in 3 parts, and does not require any supports. Top rim portion of the planter needs to be super-glued onto the main part of the planter.

Dimensions are 100mm wide x 90mm tall with pot placed in tray.

Print the top rim upside down to avoid needing supports. Remember to align your seam position so you don't end up with the random bumps you see on the tray in the pictures lol.

Drainage hole is 10mm wide. To avoid soil falling through the hold into the tray, cut a coffee filter to lay along the bottom of the planter.

I used Printed Solid Jesse Premium PLA for both parts of the planter. Tree Green for the planter, and Tree Brown for the tray.

Enjoy, and post your makes if you print one yourself!