Hier mein erster Versuch einer Spielzeugrakete.
Empfehle die Raketenstützen mit Support zu unterlegen um den Halt zu gewährleisten.
Layer High: 0.10 / 0.20mm
Infill: Gyroid 10%
Muss natürlich bei bedarf angepasst und Skaliert werden, das Model ist im Original ca 230mm hoch.
Here is my first attempt at a toy rocket.
Recommend to underlay the rocket supports with support to ensure the hold.
Layer High: 0.15mm
Infill: Gyroid 10%
Must of course be adjusted and scaled if necessary, the original model is about 230mm high.
The author marked this model as their own original creation.