DIN rail case for EmonTX v3 with EmonESP and OLED display (SH1106).

This is DIN rail case for EmonTX v3 with EmonESP and OLED display (SH1106).

Custom EmonESP board Eagle/Gerber files are at https://github.com/stanoba/EmonESP-module

My EmonESP fork with OLED display implementation is here https://github.com/stanoba/EmonESP-OLED

BoM:

4x screws 2.9 x 5 mm

4x M3 x 8 mm screw

4x M3 nut

1x bottom part (EmonTx_V3_DIN_rail_bottom.stl)

1x top part (EmonTx_V3_DIN_rail_top.stl)

1x display part (EmonTx_V3_DIN_raildisplay*.stl) - select model that suits your needs

2x DIN rail clips (EmonTx_V3_DIN_rail_clip_35mm.stl)

2x display screw plastic washers (EmonTx_V3_DIN_rail_display_washer.stl)

1x OLED display 1.3" 128x64 SH1106

1x red LED diode

1x green LED diode

2x 2K2 resistor

1x Omron micro-switch (6x6mm)

1x Custom PCB https://github.com/stanoba/EmonESP-module

1x Wemos D1 mini PRO

1x external antenna for Wemos - optional

1x coaxial cable for antenna with IPEX connector

4x wires (different colors)

Wemod D1 mini PRO wiring:

D1 -> SCL D2 -> SDA D4 -> red LED (white wire) RST -> micro-switch (brown wire) 3V3 -> 3V3 (red wire) GND -> GND (black wire) Print Settings ==============

Printer Brand:

Prusa

Printer:

Prusa Clone

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

15%

Filament: Fillamentum PLA Electric Gray