A simple and very helpful print to store your capsules where you need them! The print holds 24 capsules while resting against your coffee machine.
Designed for the Essenza Mini from Krups. In the bottom is a cutout for the screws of the housing under the machine. Thus, the part should fit exactly between the rubber feet of the machine. The coffee machine stands therefore still nonslip on your table.
Attention, the print is prone to oscillation due to its height and thin walls! Be sure to print as aligned in the print file, not as in my photo. The print starts to vibrate in the upper layers due to the fast movement of the print bed when switching between the two segments. As a result, the layers are no longer placed exactly on top of each other and the surface becomes poor, as partially seen in the photos (still works though 😉).
Add a brim to ensure a secure bond on the print bed.
If you want to create even less vibrations, reduce the accelerations and speeds in the printer settings for silent mode and activate it after half the build height.
The supports help the stiffness, so I would keep them over the entire cutouts.
Have fun and let me know how it worked out for you and if you have ideas for improvements!
Oh and check out the great print from Mintax you see left from my machine:
https://www.prusaprinters.org/prints/54988-custom-nespresso-capsule-dispenser
The author hasn't provided the model origin yet.