Raspberry Pi Zero 2 W case (PiKVM)
Case for Raspberry Pi Zero 2 W, can be used with HDMI to CSI bridge for PiKVM
29
231
6
3493
updated February 8, 2022
Makes
Comments
Loved the design! I wasn't a huge fan of using M3 screws, as the Pi Zero was designed to only take M2.5 screws. Using M3 screws will "tap" into the Pi and damage the PCB (though not in a way that matters; it's just cosmetic damage). I remixed it to fit M2.5 screws and a different HDMI-CSI bridge.
M3 screws are wrong, use M2.5
Very good, best fitting pi 2w product with hdmi capture