Vertical feet to stabilize an HP ProDesk 600 G1 SFF - will work with anything around 100mm/4in wide.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kG8sfFpiA9F
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
15%, cubic subdivision
Filament: anycubic pla black
Notes:
I used a wall thickness of 1.2mm (3 walls @ 0.4mm) and the infill pattern shows through, so try use 1.6mm (4 walls).
Bottom/Top layers set to 1mm (4 layers @ 0.25mm) but that seems slightly too flimsy, so try 1.25mm (5 layers). Category: 3D PrintingThe author marked this model as their own original creation. Imported from Thingiverse.