MacWintel Pro v2.1

• v2.1, fixed bottom piece, fixed power supply holder part 1.

This is a computer case, designed to work with:

mini itx or nano itx or micro itx (might depend on the size from the manufacture)

size: (from io connectors) 210mm X 190mm (from side to side)

sfx psu (might depend on the size from the manufacture)

size:125mmx100mmx63mm

2.5 SSD or HDD

The intention with this case is being used as a desktop PC, designed to look like the Mac Pro.

• please note that this is not a finished design, it is till a work in progress, and it might not fit the listed components, so please feel free to make any remixes of this if you feel like so.
• if you are looking for something that will work and that is smallere, then i have designed one to fit the raspberry pi.
• please note, that some of the holes and fit and finish might not work right away, and might require some additional modification after printing, since this case have yet not been tested.

(changes to the design might occur unnoticed in the future)

(i do not claim to own or anything similar, aboutany designs, names or any of Apples inc. intellectual properties , all copyrights belongs to  Apple inc. )