Lilygo T5 4.7 epaper display case

I needed a case for my e-ink weather display project using a Lilygo T5 4.7" ESP32+Epaper and wasn't satisfied with the…
6
93
1
1721
updated February 6, 2022

Description

PDF

I needed a case for my e-ink weather display project using a Lilygo T5 4.7" ESP32+Epaper and wasn't satisfied with the ones I found online so I made my own.

Main features:

Print Settings

Printer:

wanhao duplicator + E3DV6 + Rearm

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament:

doesn't matter PLA

bronze


Notes:

You may need a think knife or a cutter to detach the button from the rest of the frame, allowing it to bend flawlessly.
The back cover is a bit a pain to install "right", some rework could improve it.

Just make the upper part ideally flushed and then press on the sides to follow rounded shape and gently "clip" the back plate.

Category: DIY

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License