D8 Smelter Droid bust

The D8 Smelter droid

It was an instant favorite when I first saw it in the Return of the Jedi.

Now that Book of Boba Fett featured this droid, I decided to try my freshly acquired Blender skills. :)

Designed to fit a Prusa Mini. On the screenshots you can see, where you should paint supports on the body. The neck is floating, so MUST be supported.

I used two 3mm red LEDs with some 600 Ohm resistors in series with a 9V battery.

There is a place for the battery in the bottom of the body.

Feel free to remix this to a desktop USB hub or a card reader etc.

Have Fun!

thanks for beta testing to my friends on Twitter:  @Greg191134  @Bugman_140 @loyalmoses