6.5" 0r 6.75" Speaker Enclosure/ Can Roll Bar or Wake Tower

Wanted to design my own speaker enclosures for my boat so this is what i came up with. They will fit most 6 1/2 and 6 3/4 speaker. The inter hole size 5.5" and outer size is 6.8" the total height of the can is 7.45"

The mount is a separate piece that Im going to mess around with and make a couple different versions. The first one I did fits 2" 3/8 tubing. I used two 1/4-20 allen head screws that are 2" long to go though the top, then a 1/4-20 lock nut is press fitted in to the bottom mount.

Sizes
2"3/8
2" 1/4 (2.25")
2"
1" 3/4 (1.75")

Print the top mount at 50%+ INFILL
The mount is secured to the can with 3/8 bolt and nut

If your interested in printing the mounts but need them for a different tube size please let me know and i can change the mounts and upload them