Mechanical M3 Bolt/Screw Sorting Device

Video about the Designing process, The functionality and the Assembly

Mechanical Bolt Sorting Device for M3 bolts/Screws 6-40mm

End the struggle of manually sorting your cylinder head bolts

• Fully 3D Printed
• Operated by hand. No need for motors
• No other parts needed (Just a drop of glue)
• Printed with PLA
• High reliability
• Removable bins

Support my work by becoming a PATREON or Buy me a Coffee.

Supported Bolt Lengths:

• M3x6
• M3x8
• M3x10
• M3x12
• M3x16
• M3x18
• M3x20
• M3x25
• M3x30
• M3x35
• M3x40

PARTLIST:

• Base 1x
• Clamp 1x
• Container 11x
• Handle 1x
• LifterBig 1x
• LifterPin 2x
• LifterSmall 1x
• MainPlate 1x
• Rotator 1x
• Rotatorlid 2x
• Rotatorpin 2x
• SliderBottom 1x
• SliderTop 1x
• Sorter 1x
• Tray 1x

IMPORTANT:

• Operate the device slow for a reliable outcome. Swinging the handle too fast will cause failures
• Maker sure there is no elephant footing, brim or anything else on the rotator that can prevent the bolt from rolling out

FILAMENT I USED:

PLA+ from Elegoo (reflink)

Assembly: