Raspberry Pi 4 Case (UPDATED)

Made some updates to my Raspberry pi 4 case. 

The updates include:

• micro-SD card access panel, requires x1 M2.5x6-10
• Extended the Case housing to give clearance for the SD Card when removing PI
• Removed material on the Pi mount making the installation/removal easier
• Case mounting holes now spaced 20mm apart
• Removed material around the front cable port access 

U will need: 

• Case - M2.5x10 self-tapping screws X13
• Pi - M2.5x6-8 self-tapping screws X4
• Mounting Case - M5x10 BHCS or SHCS X2-4
• 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4

No supports are needed for this design.

The updates include:

• Extended the Case housing to give clearance for the SD Card when removing PI
• Removed material on the Pi mount making the installation/removal easier
• Case mounting holes now spaced 20mm apart