Vex Versaplanetary gearbox 90 degree drive cover

This is a cover for the 90 degree versaplanetary drive kit from Vex Robotics.
8
108
0
725
updated September 13, 2023

Description

PDF

This is a cover for the 90 degree versaplanetary drive kit from Vex Robotics. I designed and printed this to cover the exposed bevel gears. The case slides on from the side and then there are holes so you can put a bolt in and secure it. I recommend you install the 90 degree gearbox first and then snap off two of the tabs to let the case clear the mounting bolts (the picture has a mounting bolt clamping on the case, this is wrong. I will try and upload a correct picture). You only should have one bolt holding the cover on, and it should not be on of the bolts holding the gearset together.

I recommend printing in the orientation in the pictures with support enabled.

I posted the sldprt as well as the stl in case you want to modify the design at all

Print instructions

Category: Robotics

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License