Sharpie Holster for HSW (Multiple Sizes)

I like to keep Sharpies on hand to allow me to mark whatever may come across my workbench--tiny labels for electronic baggies, some writing on painters tape for a quick label, or highly visible “DO NOT TOSS” labels on the outside of boxes so my precious projects don't accidentally end up in the trash. In order to work across all of those applications, I typically keep several sizes of sharpie on hand. Looking at the existing solutions for HSW sharpie holders, I found that most required hardware (M3 bolts). I also didn't find any holders for my Chisel Tip sharpies. 

So I made hardware-free holders for my three main sharpie sizes: Fine Point, Ultra Fine Point, and Chisel Tip. The holders install using a HSW hollow insert and allow for you to slide the sharpies vertically in/out or push them straight in for a satisfying snap (my preference). Enjoy! 

NOTE: Ensure you have a hollow insert (found on RostaP's original HSW page) when you print this to avoid the post-print disappointment of not being able to immediately install it.