M5Stack Atom Thermal Printer Case

A case for the M5Stack Atom Thermal Printer.

I love the cardboard case that's supplied with the Atom thermal printer but mine started to tear after a few weeks so I decided to design something that could hold the printer and 2 rolls of paper.

Not much to the design but supports are needed for the Atom opening on the back right side of the case (already included on my gcode). Printed mine in PETG which worked well but has a bit of flex so the sliding motion isn't perfect, If I was to print it again I'd just do it in PLA or ABS so its more rigid. I had issues with warping so I used a Brim but this probably won't be necessary if you print with PLA or on a larger printbed.