3D Models GadgetsComputers

SUG-CUN-SOL

0 reviews
8.2L 3D Printed PC Gaming Case in Vertical Console Layout
19
41
0
565
updated March 16, 2025

Makes

Comments

Fuzzz Z 10
Fuzzz Z
@FuzzzZ_396846

Thanks for sharing! I know the 5090 FE version is probably unfinished yet but it appears to support 3-slot so I'm very eager to try it out.
One problem is many cards' PCIE bracket goes a bit over the backplate so the frame needs to be thinner at the contact point.
Then there is extra space behind the motherboard but that does not help add cpu cooler height. Adding another short PCIE card (R33A-AMP or R33A-ADT no difference?) will push the GPU to the left and create extra 20mm for the CPU cooler. (I think that's how fractal ridge does it)
Hope the official version is coming soon!

Reply March 21 at 8:10 AM
SUG 12
SUG
@SUG_1434503

@FuzzzZ_396846 Thanks!

I'm not quite following what you're asking in relation to the photo that seems to flipped? (red lines?)

The I/O keep-out area is definitely an issue as it was for the SUG-STEAMY and mentioned in the video: https://www.printables.com/model/995805-sug-steamy The single riser, I have mentioned before, but I can't verify if it will work.

I'd love to shine some light regarding RTX 5090 FE compatibility but until I get my hands on one, I don't think I will devote too much energy to it.

If you want to send me your card with a return label, to verify, that is something we can work out too.

Reply March 22 at 10:38 PM
Fuzzz Z 10
Fuzzz Z
@FuzzzZ_396846

@SUG_1434503 turns out I mistakenly flipped the frame inside out...now the design makes perfect sense!
I haven't been lucky to get my hands on a 5090FE, just hoping to put a 3-slot card in it (looks like the rear-brace wont install when using an additional R33A-ADT for 3-slot card, but I'll try other workarounds :)

Reply March 24 at 2:03 AM
All comments loaded