iMS-GnK: Alternative powertrain for MS-GnK using Roboman imbellers

UPDATES:

13/03/2025

• Published

This is iMS-GnK, essentialy just MS-GnK using a single stage flywheel cage with Roboman Imbellers and Kelly Industries Plus Motors!

This is fully interchangeable with stock MS-GnK parts, I use a connector on the ESC to easily swap out the flywheel cages. In theroy no changes are needed to the firmware, but bear in mind that the solenoid on delay may need to be longer since the flywheels are further away from the dart, and you may need to use different ESC settings. 

FPS should be similar to stock MS-GnK (around 200fps), despite being single stage. Unlike stock, Imbellers perform best on 4s lipo batteries instead of 3s, the size of the lipo again depends on the stocck you have chosen. 

Upper front shroud for NMS-GnK has also been included in case you wanted to create an iNMS-GnK!

No further hardware is required apart from the bolts included in the Plus Motors.

This project is licensed under the terms of the Creative Commons Non-Commercial Attribution Share Alike 4.0 license, which means you can print it, remix it, share it, and if you do and give myself credit. You cannot sell this without permission from myself. 

For further questions and support, please ask in my discord (Link in printables bio via Instagram).

New Upper assembly and flywheel cage to use Roboman Imbellers and Plus Motors