{"data":{"model":{"id":"1227977","slug":"arduino-nano-esp32-light-up-game-box","name":"Arduino Nano ESP32 Light Up Game Box.","authorship":"remix","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"0E-10","myRating":null,"ratingCount":0,"description":"

1-- Parts

1-- NeoTrellis

https://www.adafruit.com/product/3954

2-- Rubber button pad

https://www.adafruit.com/product/1611

3-- Arduino Nano ESP32

https://store-usa.arduino.cc/products/nano-esp32-with-headers

4-option A-prefered-- JST PH 2mm 4-Pin Female Socket Connector

https://www.adafruit.com/product/3950

4-option B-- JST PH 2mm 4-Pin Male Header Cable with jumper cables if female JST is out of stock --- note. you will connect the female jumpers to the JST to have a female connector to attach to the Nano.

https://www.adafruit.com/product/3955

https://www.adafruit.com/product/266

2-- Initial assembly

1-- place the Nano ESP32 into the slot in the main part case with the pins facing up

2-- slot the Nano ESP32 Case Top into the slot in the main part case securing the Nano in place.

3-- press fit the NeoTrellis into the nt-tray

3-- Wiring

1-- insert the JST into the connector on the NeoTrellis

2-- connect ESP32 3v3 -to- NeoTrellis Vin

3-- connect ESP32 GND -to- NeoTrellis GND

4-- connect ESP32 A4/SDA -to- NeoTrellis SDA

5-- connect ESP32 A5/SCL -to- NeoTrellis SCL

This should only be done after the wiring. I would recommend doing a systems test with the basic example in the Adafruit seesaw--NeoTrellis library before final assembly

4-- Final assembly

1-- snap the nt-tray/NeoTrellis part into the main part case making sure that no wires get caught under the nt-tray/NeoTrellis part.

2-- lay the Rubber button pad on top of the NeoTrellis making sure that the pad lays flat on top.

3-- snap the nt-top on top securing everything inside.

if you have any questions about the assembly please comment!

5-- Coding

1--libraries--install the BlockNot library https://github.com/EasyG0ing1/BlockNot. and the Adafruit Seesaw library github.com/adafruit/Adafruit_Seesaw.

2--Code--

//////////////////////////////////////////////////////////////\n// whack-a-mole game //\n//////////////////////////////////////////////////////////////\n\n#include \"Adafruit_NeoTrellis.h\"  //librairies\n#include <BlockNot.h>\n\nBlockNot moleTimer(random(1000, 2000));  //non blocking timers for different aspects of the game\nBlockNot blueTimer(random(400, 1200));\nBlockNot levelFourTimer(1000);\nBlockNot levelEightTimer(100);  //<--CHANGE THIS TO MAKE LEVEL EIGHT HARDER OR EASIER<-- lower is harder higher is easier. timing is in milliseconds\nAdafruit_NeoTrellis trellis;\n\n////////////////////////////////////////////////////////////// variables\n\nint randNum1;             // random numbers for different uses\nint randNum2;             // random numbers for different uses\nint count1;               // multipurpose counter variable\nint count2 = 0;           // multipurpose counter variable\nint blueCount;            // counts how many blue pixels there are\nint blueAmount;           // hom many blue there should be\nint redPoints = 0;        // how many red have been pressed\nint speedPoints = 0;      //variable for game speed and other game events\nint levelFourCount = 0;   //counter for how many times you have pressed a button during the level four challenge\nbool redCountOff = HIGH;  //boolean to turn of red press counting during chalenges\n\n////////////////////////////////////////////////////////////// buttons\n\n//define a callback for key presses\nTrellisCallback blink(keyEvent evt) {\n  if (evt.bit.EDGE == SEESAW_KEYPAD_EDGE_RISING) {\n    // Check is the pad pressed?\n\n    if (trellis.pixels.getPixelColor(evt.bit.NUM) == 16711680) {  // if button pressed is red\n      trellis.pixels.setPixelColor(evt.bit.NUM, 0);               //turn key black\n      trellis.pixels.show();\n      if (redCountOff == HIGH) {\n        redPoints++;  // each time you press a red button add to counter\n        Serial.println(\"redPoint up\");\n      }\n      if (redPoints > 20) {  // if you have pressed red twenty times increase speedPoints\n        speedPoints++;\n        if (speedPoints == 4) {  // if are on speed level four do a special challenge\n          levelFour();\n        }\n        if (speedPoints == 8) {  // if are on speed level eight do a special challenge\n          levelEight();\n        }\n        redPoints = 0;\n      }\n\n    } else if (trellis.pixels.getPixelColor(evt.bit.NUM) == 255) {  // if button pressed is blue\n      lose();\n\n    } else {                                                   // if button pressed is black\n      trellis.pixels.setPixelColor(random(0, 16), 255, 0, 0);  // make more red appear\n      trellis.pixels.setPixelColor(random(0, 16), 255, 0, 0);\n      trellis.pixels.setPixelColor(random(0, 16), 255, 0, 0);\n      trellis.pixels.setPixelColor(random(0, 16), 255, 0, 0);\n      trellis.pixels.setPixelColor(random(0, 16), 255, 0, 0);\n      trellis.pixels.setPixelColor(random(0, 16), 255, 0, 0);\n      trellis.pixels.setPixelColor(random(0, 16), 255, 0, 0);\n      trellis.pixels.show();\n    }\n\n  } else if (evt.bit.EDGE == SEESAW_KEYPAD_EDGE_FALLING) {\n    // or is the pad released?\n    // do nothing when button is released\n  }\n\n  return 0;\n}\n\n////////////////////////////////////////////////////////////// setup\n\nvoid setup() {\n  Serial.begin(9600);  //begin serial connection\n\n\n  if (!trellis.begin()) {  //error messages\n    Serial.println(\"Could not start trellis, check wiring?\");\n    while (1) delay(1);\n  } else {\n    Serial.println(\"NeoPixel Trellis started\");\n  }\n\n  //activate all keys and set callbacks\n  for (int i = 0; i < NEO_TRELLIS_NUM_KEYS; i++) {\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_RISING);\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_FALLING);\n    trellis.registerCallback(i, blink);\n  }\n\n  //do a little animation to show we're on\n  for (uint16_t i = 0; i < trellis.pixels.numPixels(); i++) {\n    trellis.pixels.setPixelColor(i, Wheel(map(i, 0, trellis.pixels.numPixels(), 0, 255)));\n    trellis.pixels.show();\n    delay(50);\n  }\n  for (uint16_t i = 0; i < trellis.pixels.numPixels(); i++) {\n    trellis.pixels.setPixelColor(i, 0x000000);\n    trellis.pixels.show();\n    delay(50);\n  }\n}\n\n////////////////////////////////////////////////////////////// loop\n\nvoid loop() {\n  trellis.read();\n  delay(15);\n\n  ////////////////////////////////////////////////////////////// moletimer\n\n  if (moleTimer.TRIGGERED) {  // if moletimer triggerd\n    Serial.println(\"moleTimer TRIGGERED\");\n    moleTimer.setDuration(random(200 - (speedPoints * 12), 2100 - (speedPoints * 130)));  //make a new random duration until next moletimer trigger\n    randNum1 = random(0, 16);                                                             //random color for new pixel\n    for (count1 = 0; trellis.pixels.getPixelColor(randNum1) != 0; count1++) {             //repeat if the pixel is already a color\n      // statement(s);\n      randNum1 = random(0, 16);\n      if (count1 > 20) {  // if you have tried twenty times to fill a pixel quit so you cant get in an endless loop.\n        break;\n      }\n    }\n    if (trellis.pixels.getPixelColor(randNum1) == 0) {  //make sure the chosen pixel is black just to be sure\n      trellis.pixels.setPixelColor(randNum1, 255, 0, 0);\n      trellis.pixels.show();\n    }\n  }\n  for (uint16_t i = 0; i < trellis.pixels.numPixels() && trellis.pixels.getPixelColor(i) != 0; i++) {  //check if the screen is filled with colored pixels\n    if (i == 15) {\n      lose();  //lose animation and reset the game\n    }\n  }\n\n  ////////////////////////////////////////////////////////////// bluetimer\n\n  if (blueTimer.TRIGGERED) {  // if bluetimer is triggered\n    Serial.println(\"blueTimer TRIGGERED\");\n    blueTimer.setDuration(random(400 - (speedPoints * 12), 1200 - (speedPoints * 45)));  //make a new random duration until next bluetimer trigger\n    randNum1 = random(0, 16);                                                            //random color for new pixel\n    for (count1 = 0; trellis.pixels.getPixelColor(randNum1) != 0; count1++) {            //repeat if the pixel is already a color\n      // statement(s);\n      randNum1 = random(0, 16);\n      if (count1 > 20) {  // if you have tried twenty times to fill a pixel quit so you cant get in an endless loop.\n        break;\n      }\n    }\n    if (trellis.pixels.getPixelColor(randNum1) == 0) {  //make sure the chosen pixel is black just to be sure\n      trellis.pixels.setPixelColor(randNum1, 0, 0, 255);\n      trellis.pixels.show();\n    }\n    blueCount = 0;\n    for (uint16_t i = 0; i < trellis.pixels.numPixels(); i++) {  //check how many blue pixels are currently on screen\n      if (trellis.pixels.getPixelColor(i) == 255) {\n        blueCount++;\n      }\n    }\n    if (speedPoints <= 5) {  //change how many blue pixels are on screen depending on how far you are through the game\n      blueAmount = 2;\n    }\n    if (speedPoints >= 6) {\n      blueAmount = 3;\n    }\n    if (speedPoints >= 12) {\n      blueAmount = 4;\n    }\n    if (blueCount > blueAmount) {  // if you have more blue on screen then there should be\n      randNum1 = random(0, 16);\n      for (count1 = 0; trellis.pixels.getPixelColor(randNum1) != 255; count1++) {  //pick a random pixel until you find one thats blue\n        // statement(s);\n        randNum1 = random(0, 16);\n      }\n      trellis.pixels.setPixelColor(randNum1, 255, 0, 0);  // turn the random pixel red\n      trellis.pixels.show();\n    }\n  }\n}\n\n\n////////////////////////////////////////////////////////////// animation\n\nvoid lose() {\n  moleTimer.stop();  //stop timers\n  blueTimer.stop();\n\n  for (int i = 0; i < NEO_TRELLIS_NUM_KEYS; i++) {  //turn off buttons\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_RISING, false);\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_FALLING, false);\n  }\n  for (uint16_t i = 0; i < trellis.pixels.numPixels(); i++) {  //wipe screen with white\n    trellis.pixels.setPixelColor(i, 255, 255, 255);\n    trellis.pixels.show();\n    delay(50);\n  }\n\n  for (uint16_t i = 0; i < speedPoints; i++) {  //wipe as many pixels as you have speedPoints\n    trellis.pixels.setPixelColor(i, Wheel(map(i, 0, trellis.pixels.numPixels(), 0, 255)));\n    trellis.pixels.show();\n    delay(1000 / speedPoints);\n  }\n\n  for (uint16_t i = 0; i < trellis.pixels.numPixels(); i++) {  // wipe with black\n    trellis.pixels.setPixelColor(i, 0);\n    trellis.pixels.show();\n    delay(50);\n  }\n  for (int i = 0; i < NEO_TRELLIS_NUM_KEYS; i++) {  //turn buttons on\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_RISING);\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_FALLING);\n    trellis.registerCallback(i, blink);\n  }\n  trellis.read();\n\n  redPoints = 0;  // reset points\n  speedPoints = 0;\n\n  moleTimer.start(WITH_RESET);  //start timers\n  blueTimer.start(WITH_RESET);\n}\n////////////////////////////////////////////////////////////// level four challenge\n\nvoid levelFour() {\n  redCountOff = LOW;\n  count2 = 0;\n  moleTimer.stop();  //stop timers\n  blueTimer.stop();\n\n  for (int i = 0; i < NEO_TRELLIS_NUM_KEYS; i++) {  //turn off buttons\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_RISING, false);\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_FALLING, false);\n  }\n  for (uint16_t i = 0; i < 4; i++) {  // wipe the screen with certain shades of green and blue\n    trellis.pixels.setPixelColor(i, 0, 255, 0);\n    trellis.pixels.show();\n    delay(50);\n  }\n  for (uint16_t i = 4; i < 8; i++) {  // wipe the screen with certain shades of green and blue\n    trellis.pixels.setPixelColor(i, 0, 255, 128);\n    trellis.pixels.show();\n    delay(50);\n  }\n  for (uint16_t i = 8; i < 12; i++) {  // wipe the screen with certain shades of green and blue\n    trellis.pixels.setPixelColor(i, 0, 255, 255);\n    trellis.pixels.show();\n    delay(50);\n  }\n  for (uint16_t i = 12; i < 16; i++) {  // wipe the screen with certain shades of green and blue\n    trellis.pixels.setPixelColor(i, 0, 128, 255);\n    trellis.pixels.show();\n    delay(50);\n  }\n\n  for (uint16_t i = 0; i < trellis.pixels.numPixels(); i++) {  // wipe with black\n    trellis.pixels.setPixelColor(i, 0);\n    trellis.pixels.show();\n    delay(50);\n  }\n  for (int i = 0; i < NEO_TRELLIS_NUM_KEYS; i++) {  //turn buttons on\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_RISING);\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_FALLING);\n    trellis.registerCallback(i, blink);\n  }\n  levelFourTimer.start(WITH_RESET);\n  levelFourCount = 0;            // reset the counter\n  while (levelFourCount < 30) {  // repeat until you have pressed 30 times\n    levelFourCount++;\n    levelFourTimer.setDuration(1000 - (levelFourCount * 12));  // timer speed is one second minus time for each button pressed\n    randNum1 = random(0, 16);                                  // random red pixel\n    for (count1 = 0; trellis.pixels.getPixelColor(randNum1) != 0; count1++) {\n      // statement(s);\n      randNum1 = random(0, 16);\n      if (count1 > 20) {\n        break;\n      }\n    }\n    if (trellis.pixels.getPixelColor(randNum1) == 0) {  // make sure its black\n      trellis.pixels.setPixelColor(randNum1, 255, 0, 0);\n      trellis.pixels.show();\n    }\n\n    randNum1 = random(0, 16);  // and random blue pixel\n    for (count1 = 0; trellis.pixels.getPixelColor(randNum1) != 0; count1++) {\n      // statement(s);\n      randNum1 = random(0, 16);\n      if (count1 > 20) {\n        break;\n      }\n    }\n    if (trellis.pixels.getPixelColor(randNum1) == 0) {  // make sure its black\n      trellis.pixels.setPixelColor(randNum1, 0, 0, 255);\n      trellis.pixels.show();\n    }\n    while (levelFourTimer.TRIGGERED != true) {  // wait while checking for button presses\n      trellis.read();\n      delay(15);\n    }\n    count2 = 0;\n    for (uint16_t i = 0; i < trellis.pixels.numPixels(); i++) {  //check for if there are any red buttons left on screen\n      if (trellis.pixels.getPixelColor(i) == 16711680) {\n        count2++;\n      }\n\n      if (count2 >= 1) {  // if there are lose and break out of the function\n        lose();\n        break;\n      }\n    }\n    if (count2 >= 1) {\n      break;\n    }\n    trellis.pixels.clear();  // clear the pixels\n    trellis.pixels.show();\n  }\n\n\n  moleTimer.start(WITH_RESET);  //restart timers\n  blueTimer.start(WITH_RESET);\n  redCountOff = HIGH;\n}\n\n////////////////////////////////////////////////////////////// level eight challenge\n\nvoid levelEight() {\n  redCountOff = LOW;\n  moleTimer.stop();  //stop timers\n  blueTimer.stop();\n  for (int i = 0; i < NEO_TRELLIS_NUM_KEYS; i++) {  //turn off buttons\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_RISING, false);\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_FALLING, false);\n  }\n  for (uint16_t i = 0; i < 4; i++) {  // wipe the screen with certain shades of red and blue\n    trellis.pixels.setPixelColor(i, 255, 0, 0);\n    trellis.pixels.show();\n    delay(50);\n  }\n  for (uint16_t i = 4; i < 8; i++) {  // wipe the screen with certain shades of red and blue\n    trellis.pixels.setPixelColor(i, 255, 0, 128);\n    trellis.pixels.show();\n    delay(50);\n  }\n  for (uint16_t i = 8; i < 12; i++) {  // wipe the screen with certain shades of red and blue\n    trellis.pixels.setPixelColor(i, 255, 0, 255);\n    trellis.pixels.show();\n    delay(50);\n  }\n  for (uint16_t i = 12; i < 16; i++) {  // wipe the screen with certain shades of red and blue\n    trellis.pixels.setPixelColor(i, 128, 0, 255);\n    trellis.pixels.show();\n    delay(50);\n  }\n\n  for (uint16_t i = 0; i < trellis.pixels.numPixels(); i++) {  // wipe with black\n    trellis.pixels.setPixelColor(i, 0);\n    trellis.pixels.show();\n    delay(50);\n  }\n  for (int i = 0; i < NEO_TRELLIS_NUM_KEYS; i++) {  //turn buttons on\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_RISING);\n    trellis.activateKey(i, SEESAW_KEYPAD_EDGE_FALLING);\n    trellis.registerCallback(i, blink);\n  }\n  levelFourTimer.start(WITH_RESET);\n  count2 = 0;\n  for (int i = 0; i <= 3; i++) {                            // three repeats\n    for (int i = 0; i < trellis.pixels.numPixels(); i++) {  //wipe with red while you try and get rid of the red\n      trellis.pixels.setPixelColor(i, 255, 0, 0);           // light up the pixel\n      trellis.pixels.show();\n      while (levelEightTimer.TRIGGERED != true) {  // wait whil checking the buttons\n        delay(15);\n        trellis.read();\n        for (count2 = 0; count2 < trellis.pixels.numPixels() && trellis.pixels.getPixelColor(count2) == 16711680; count2++) {  // if screen is covered in red you lose\n          Serial.println(count2);\n          if (count2 == 16) {\n            lose();  // lose\n            Serial.println(\"lose level eight\");\n            break;  // break out of function\n          }\n        }\n        if (count2 == 16) {\n          break;\n        }\n      }\n\n      if (count2 == 16) {\n        break;\n      }\n    }\n    if (count2 == 16) {\n      break;\n    }\n  }\n\n  moleTimer.start(WITH_RESET);  //restart timers\n  blueTimer.start(WITH_RESET);\n  redCountOff = HIGH;\n}\n////////////////////////////////////////////////////////////// rainbow color\n\n// Input a value 0 to 255 to get a color value.\n// The colors are a transition r - g - b - back to r.\nuint32_t Wheel(byte WheelPos) {  //not sure exactly how this works because I took this from the example sketch but it returns a color\n  if (WheelPos < 85) {\n    return trellis.pixels.Color(WheelPos * 3, 255 - WheelPos * 3, 0);\n  } else if (WheelPos < 170) {\n    WheelPos -= 85;\n    return trellis.pixels.Color(255 - WheelPos * 3, 0, WheelPos * 3);\n  } else {\n    WheelPos -= 170;\n    return trellis.pixels.Color(0, WheelPos * 3, 255 - WheelPos * 3);\n  }\n  return 0;\n}\n

3--upload--I had to use the gpio pin numbering for some reason on this project along with the esptool uploader to fix upload problems and errors. this may change for other Arduino Nano ESP32 devices as arduino updates their devices and IDEs.

4--What does this code do?--This game is similar to whack a mole. The player attempts to press the red buttons and avoid the blue. The game slowly progresses by getting faster. If the screen fills up with red and blue the player loses. When you lose the screen first wipes completely with white and then wipes pixels with a rainbow affect showing how many points the player had. If you get to level four the screen wipes green and a minigame challenge starts. In the challenge the screen shows two pixels at a time. One red and one blue. The player must press the red one before the timer runs out or else they lose. This happens 30 times while slowly getting faster. If you get to level eight a harder challenge happens. The screen wipes with red pixels three times and the player must try to clear the red pixels while this happens. If you find the level eight challenge to be too difficult change the BlockNot levelEightTimer on line eleven. making the variable higher makes the game easier and lower makes it harder. the timer is in milliseconds between each pixel appearing in level eight.

4--Final Notes

Feel free to comment any questions or problems and remix any part of this project however you like whether it is changing and updating my already existing code or making a completely new projet. Have fun experimenting with this project. and feel free to code whatever you want onto it.

","category":{"id":"52","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","description":"Are you a maker? Everyone is, be a printer. Upgrade your home workshop and combine different materials and methods of crafting including 3D printing.","__typename":"CategoryType"},{"id":"52","name":"Electronics","nameEn":"Electronics","description":"Keen on electronics devices and making your own gadgets? Use Raspberry Pi, Arduino, or GoPro and create new equipment using 3D print. Let's start!","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-04-12T17:54:27.426594+00:00","firstPublish":"2025-04-11T21:20:12.927867+00:00","datePublished":"2025-04-12T17:54:27.386920+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"A little box that can play games with light up buttons","likesCount":5,"makesCount":0,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":1,"displayCount":38,"filesCount":5,"privateCollectionsCount":0,"publicCollectionsCount":1,"pdfFilePath":"media/prints/1227977/pdfs/1227977-arduino-nano-esp32-light-up-game-box-4f34d882-bb63-4a04-8e33-d6af60460570.pdf","commentCount":0,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"4261955","filePath":"media/prints/1a1ec592-3da0-4c7c-8886-c7f4ba91264e/images/9294930_70511380-6958-4d83-83e1-f5c29a964dc2_955a84c6-2bd7-405f-9da5-1867da8f93b8/untitled-drawing-3.png","rotation":0,"imageHash":"zOYFPxDXmIh1hoh/gWR3uFiEZweYj3YI","imageWidth":2500,"imageHeight":2500,"__typename":"PrintImageType"},"images":[{"id":"4261955","filePath":"media/prints/1a1ec592-3da0-4c7c-8886-c7f4ba91264e/images/9294930_70511380-6958-4d83-83e1-f5c29a964dc2_955a84c6-2bd7-405f-9da5-1867da8f93b8/untitled-drawing-3.png","rotation":0,"imageHash":"zOYFPxDXmIh1hoh/gWR3uFiEZweYj3YI","imageWidth":2500,"imageHeight":2500,"__typename":"PrintImageType"},{"id":"4261932","filePath":"media/prints/3cc7b472-8c22-47a7-b443-736acba795bb/images/9294862_b2e26ebb-7f04-4eba-ab51-e54e27db264c_a2521ed1-73b1-4ccb-8a90-a103ee6d96d5/img_7172.jpg","rotation":0,"imageHash":"SPYJPQQ2Vnt2B4d5h4l4iL+Guw0F","imageWidth":4284,"imageHeight":5712,"__typename":"PrintImageType"},{"id":"4261935","filePath":"media/prints/460d44ef-555d-4947-928a-bc87bcca4732/images/9294864_358f9898-715a-496c-bf3f-a5fbc35d4d78_038472b2-8159-4c61-a895-e2920ab930a3/img_7166.jpg","rotation":0,"imageHash":"kxcKLYanZ0ZodIePhYh3Z4929/bI","imageWidth":5712,"imageHeight":4284,"__typename":"PrintImageType"},{"id":"4261933","filePath":"media/prints/a799bb94-f564-4bbe-b6e9-3bd5a8cbbae4/images/9294865_e7ccd9f4-e3d9-44e9-bba2-71934ac71033_2c78915b-8c7b-46ae-a49e-68991c3848f7/img_7158.jpg","rotation":0,"imageHash":"YwgWBQKHiHB3aHh4l3eYiOeEj834","imageWidth":4284,"imageHeight":5712,"__typename":"PrintImageType"},{"id":"4261937","filePath":"media/prints/21629b10-208e-40e0-820c-f96bcff44f1c/images/9294867_38e54340-37f3-4c11-b5d4-ac1a19298f91_c8a653ad-1a36-4a4d-8a2a-4fd8a982ef34/img_7159.jpg","rotation":0,"imageHash":"YBgWBQCHiHCHh4iXiIeHiOiQjb/I","imageWidth":4284,"imageHeight":5712,"__typename":"PrintImageType"},{"id":"4261936","filePath":"media/prints/91fc20fe-a042-47f7-a0fa-ce531aac7bd0/images/9294866_f77c8641-96a1-4de6-8e84-d6ef40fb6d9b_fade8894-205d-4f4f-8f00-33d961ef14cd/img_7157.jpg","rotation":0,"imageHash":"YhgWDQJ3eHB3d4hnmHeIiOiAjn/o","imageWidth":4284,"imageHeight":5712,"__typename":"PrintImageType"},{"id":"4338473","filePath":"media/prints/4d032ac1-daf6-4049-b338-dccdaaaa2941/images/9482402_78c09f0a-c4cb-4556-8ec7-67609c5e562e_74837c63-519d-441c-bbcb-63b1121ce45b/arduino-nano-esp32-led-game-box-1.gif","rotation":0,"imageHash":"TBgGBIKvXUduVpeYdYZccJgEhw==","imageWidth":1152,"imageHeight":648,"__typename":"PrintImageType"},{"id":"4338475","filePath":"media/prints/6e4d4a19-3d33-4b10-a58d-075b1fe9e9c8/images/9482403_a9ce8ae2-6d8d-4db2-8378-1cfb0ddfa8a5_8c4e3878-c23c-4585-8e0f-a6740999c108/arduino-nano-esp32-led-game-box.gif","rotation":0,"imageHash":"jBcGJIRH6GqPh2aAjIn4dq0Kxg==","imageWidth":1152,"imageHeight":648,"__typename":"PrintImageType"},{"id":"4338474","filePath":"media/prints/ab3f3f11-80b7-45d2-bbd5-e2f159c09d3d/images/9482404_6e5bb0f9-2522-415a-997f-0d4fc17e5baa_49858b66-5080-4432-93e5-8c8b17165f59/arduino-nano-esp32-led-game-box-2.gif","rotation":0,"imageHash":"iRcGHIJflZt9mHZmmYv2nvyHFg==","imageWidth":1152,"imageHeight":648,"__typename":"PrintImageType"},{"id":"4338476","filePath":"media/prints/7972fc37-029c-431e-a3a7-9d8e4618a17d/images/9482405_d3cce8d4-6e65-4fb4-978b-d376af5ddfa6_57346ab7-3e36-43ef-b5e0-c8e9c8249088/arduino-nano-esp32-led-game-box-3.gif","rotation":0,"imageHash":"yScGHIJrtmivh3iGeXf5hd4ENg==","imageWidth":1152,"imageHeight":648,"__typename":"PrintImageType"},{"id":"4338928","filePath":"media/prints/1adef30d-b7ca-400a-8c15-0563ba53f97b/images/9483468_126ab31c-cf87-4371-9c21-eaca242799fb_74aee9d8-c5b5-4adf-9282-a2366fc2f065/arduino-nano-esp32-led-game-box-8.gif","rotation":0,"imageHash":"SicGHIRnwIupl4hjy5nghY0QBw==","imageWidth":1152,"imageHeight":648,"__typename":"PrintImageType"},{"id":"4338919","filePath":"media/prints/6776e2fd-eb00-4839-99f5-90acc4155edc/images/9483454_0337bd66-5578-48ca-91f6-e634dad21fbf_629ff8f7-6fc7-4927-9875-a9444b77c2a7/arduino-nano-esp32-led-game-box-6.gif","rotation":0,"imageHash":"yQYGLIAM7YPOeoeQPH35in1/tg==","imageWidth":1152,"imageHeight":648,"__typename":"PrintImageType"},{"id":"4338918","filePath":"media/prints/a7871bd5-6503-40b9-8201-5c5d37f1f30d/images/9483453_3344344a-9bf2-4845-8d83-625c24203efd_073c3975-afe5-4486-b6a8-f5074cdbe9d1/arduino-nano-esp32-led-game-box-7.gif","rotation":0,"imageHash":"SxgGBILmunmPZ3WYhon2kokJiA==","imageWidth":1152,"imageHeight":648,"__typename":"PrintImageType"}],"tags":[{"name":"games","id":"423","__typename":"TagType"},{"name":"fun","id":"1006","__typename":"TagType"},{"name":"lights","id":"1960","__typename":"TagType"},{"name":"neopixel","id":"3206","__typename":"TagType"},{"name":"adafruit","id":"3207","__typename":"TagType"},{"name":"buttonbox","id":"3930","__typename":"TagType"},{"name":"remix","id":"5411","__typename":"TagType"},{"name":"neotrellis","id":"7125","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"5102870","filePreviewPath":"media/prints/1227977/previews/cb80781d28916768f97be061f6d3e1abd3cfdb30.png","__typename":"STLType"},"license":{"id":"1","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[{"id":"539417","modelId":"7247","modelName":"NeoTrellis Color Match Game","modelAuthor":{"id":"3814","handle":"Adafruit","verified":true,"publicUsername":"Adafruit","__typename":"UserType"},"model":{"id":"7247","name":"NeoTrellis Color Match Game","slug":"neotrellis-color-match-game","datePublished":"2019-10-19T16:04:34.030608+00:00","image":{"id":"30265","filePath":"media/prints/7247/images/52871_54d205c3-efea-4024-bfde-cddd1b437295/hero-neotrellis_7247.jpg","rotation":0,"imageHash":"b9cFDYD3SGd6dYl/ghnYhQZ5INIH","imageWidth":5760,"imageHeight":3840,"__typename":"PrintImageType"},"club":false,"authorship":"author","license":{"id":"1","name":"Creative Commons \u2014 Attribution","disallowRemixing":false,"__typename":"LicenseType"},"eduProject":null,"__typename":"PrintType"},"url":null,"urlAuthor":null,"urlImage":null,"urlTitle":null,"urlLicense":null,"urlLicenseText":null,"__typename":"PrintRemixType"}],"remixDescription":"

I combined two of the parts and added a case for the Arduino Nano ESP32 that I designed. I wrote new code and removed unnecessary plastic in the case that was meant to hold a battery

","__typename":"PrintType","user":{"id":"2564839","handle":"ArduinoPrint_2564839","verified":false,"dateVerified":null,"publicUsername":"ArduinoPrints","avatarFilePath":"media/auth/avatars/f0/f0498930-1f8e-4bf5-8672-fe2612060862.jpg","badgesProfileLevel":{"profileLevel":6,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"1103518","name":"Arduino Nano esp32 media knob","slug":"arduino-nano-esp32-media-knob","ratingAvg":"0E-10","likesCount":6,"liked":null,"datePublished":"2025-04-07T19:15:47.382206+00:00","dateFeatured":null,"firstPublish":"2024-12-10T03:04:07.841068+00:00","downloadCount":5,"mmu":false,"category":{"id":"27","path":[{"id":"21","name":"Gadgets","nameEn":"Gadgets","__typename":"CategoryType"},{"id":"27","name":"Computers","nameEn":"Computers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-04-07T19:15:47.996378+00:00","image":{"id":"3847208","filePath":"media/prints/1103518/images/8340822_f13fb220-70d6-4b9f-8696-66ef02024168_58f3646c-b67d-47d7-9eda-f6dffef66c5c/image2.jpeg","rotation":0,"imageHash":"IigSFYKXeHiAhniMh3iXiPd1eUAH","imageWidth":5712,"imageHeight":4284,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"2564839","handle":"ArduinoPrint_2564839","verified":false,"dateVerified":null,"publicUsername":"ArduinoPrints","avatarFilePath":"media/auth/avatars/f0/f0498930-1f8e-4bf5-8672-fe2612060862.jpg","badgesProfileLevel":{"profileLevel":6,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"1227977","name":"Arduino Nano ESP32 Light Up Game Box.","slug":"arduino-nano-esp32-light-up-game-box","ratingAvg":"0E-10","likesCount":5,"liked":null,"datePublished":"2025-04-12T17:54:27.386920+00:00","dateFeatured":null,"firstPublish":"2025-04-11T21:20:12.927867+00:00","downloadCount":1,"mmu":false,"category":{"id":"52","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"52","name":"Electronics","nameEn":"Electronics","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-04-12T17:54:27.426594+00:00","image":{"id":"4261955","filePath":"media/prints/1a1ec592-3da0-4c7c-8886-c7f4ba91264e/images/9294930_70511380-6958-4d83-83e1-f5c29a964dc2_955a84c6-2bd7-405f-9da5-1867da8f93b8/untitled-drawing-3.png","rotation":0,"imageHash":"zOYFPxDXmIh1hoh/gWR3uFiEZweYj3YI","imageWidth":2500,"imageHeight":2500,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"2564839","handle":"ArduinoPrint_2564839","verified":false,"dateVerified":null,"publicUsername":"ArduinoPrints","avatarFilePath":"media/auth/avatars/f0/f0498930-1f8e-4bf5-8672-fe2612060862.jpg","badgesProfileLevel":{"profileLevel":6,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"}],"featured":false,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}

Arduino Nano ESP32 Light Up Game Box.

Makes Add make

Comments

Makes