3D-Printed Coffee Distributor – 53mm & 58mm (Sizes)

This is a  3D model of a coffee distributor tool, perfect for ensuring an even and consistent tamp in your portafilter. The model supports both 53mm and 58mm sizes to fit different espresso machines.

To assemble this model, you’ll need heat inserts (type Voron M3) or if you dont have them you can use glue. Happy printing and even happier brewing!

Assembly Instructions:

1. Insert the heat-set inserts into the three 3D-printed segments.
2. Mount the three segments onto the bottom ring. If you don’t have the heat inserts, you can optionally use glue for a secure fit.
3. Slide the middle ring over the assembled bottom section.
4. Screw on the top ring to complete the assembly.